Phone: 1-949-916-4111

OMS LaserPoint LP01-HF Laser Vibrometer Specifications

The OMS LaserPoint LP01-HF Vibrometer is based on a patented electro-optical configuration. The system consists of two components, an optical head and an electronic controller, which are connected by a cable.

The optical head contains a near-infrared laser diode with a built-in high speed photo-detector, an acousto-optic modulator, and a red laser diode to aid in aiming the beam. The controller contains a demodulator, a signal strength indicator, two selectable velocity ranges, and an array of low pass filter options.

Velocity Range
5 μm/s to 800 mm/s
Vibration Frequency Range
0.01 Hz to 100 kHz
Working Distance
1 cm to 5 m
Displacement Range
0.04 nm (at 20 kHz) to 12 mm (at 10 Hz)
Collimated (No Focusing Needed)
Surface Reflectivity
Realistic Surfaces
Signal Output
Analog Velocity and 10.7 MHz FM Outputs
Laser Head: 24 x 11.4 x 7.6 cm
Electronic Controller: 30 x 22 x 6 cm
Laser Head: 1.4 kg
Electronic Controller: 3.9 kg
Low Pass Filters
1, 5, 20, 40, 60 kHz
Output Voltage (max)
± 10 Volts
780 nm, < 20 mW, Class 3B
650 nm, < 1 mW, Class 2
Power Requirement
100 to 230 VAC at 50/60 Hz
Temperature Range
3 - 45°C