logo
Phone: 1-949-916-4111
Scanset

OMS LaserPoint LP01 Laser Vibrometer Specifications

The OMS LaserPoint LP01 Vibrometer is based on a patented electro-optical configuration. The system consists of two components, an optical head and an electronic controller, which are connected by a cable.

The optical head contains a near-infrared laser diode with a built-in high speed photo-detector, an acousto-optic modulator, and a red laser diode to aid in aiming the beam. The controller contains a demodulator, a signal strength indicator, two selectable velocity ranges, and an array of low pass filter options.


Velocity Range
5 μm/s to 800 mm/s 1
Vibration Frequency Range
0.01 Hz to 20 kHz 2
Working Distance
1 cm to 5 m
Displacement Range
0.04 nm (at 20 kHz) to 120 mm (at 1 Hz)
Optics
Collimated (No Focusing Needed)
Surface Reflectivity
Realistic Surfaces
Signal Output
Analog Velocity and 10.7 MHz FM Outputs
Dimensions
Laser Head: 24 x 11.4 x 7.6 cm
Electronic Controller: 30 x 22 x 6 cm
Weight
Laser Head: 1.4 kg
Electronic Controller: 3.9 kg
Low Pass Filters
1,2,5,10,20 kHz
Output Voltage (max)
± 10 Volts
Laser
780 nm, <15mW, Class IIIb
650 nm, <1mW, Class II
Power Requirement
100 to 230 VAC at 50/60 Hz
Temperature Range
3 - 45°C
1 Higher velocities are available with the LaserPoint. Please contact us for more information.
2 Frequencies above 20 kHz can be measured with the LaserPoint. Please contact us for more information